Torque checker
- With Calibration cert.
When closing before a beginning by easy operation, Torque Wrench can be checked daily.
LED value shown on the display can read the numerical value without an error easily.
3 kinds of measurement mode (truck mode peak mode peak hold mode) can be changed.
It corresponds to various square Drive adjustable type by 2 kinds of adapter of an accessory (change adapter hexagonal convex adapter).
Is Manufacturer’s Suggested Retail Price in Japanese market as just for reference.
- A power supply :100V-240V
- Operating temp. range : 5 ℃-40 ℃
- Storage temp. range : 20 ℃-70 ℃ of-
- Measurement mode: Truck mode/peak mode/peak hold mode
The specification
Models | Minimum torque capacity (N m) | The upper limit torque capacity (N m) | Measurement accuracy (the %) | Min. display | dimensions (mm)D | dimensions (mm)L | dimensions (mm)S | Method for measurement | 1 scale (Nm) | Units | weight (g) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
TTC-60 | 2 | 60 | ± 1%+1 scale | 0.00- | 30.0 | 155 | 12.7 | The right direction of rotation (clockwise) | 0.01 | Nm | 2200 | |
TTC-500 | 20 | 500 | ± 1%+1 scale | 0.0- | 48.0 | 173 | 25.4 | The right direction of rotation (clockwise) | 0.1 | Nm | 2600 | |
TTC-1000 | 50 | 1000 | ± 1%+1 scale | 0.0- | 48.0 | 173 | 25.4 | The right direction of rotation (clockwise) | 0.1 | Nm | 2800 |
- ※ A change adapter-AC adapter isn’t included in weight .
Accessories
○ A change adapter-(1 for each) | |
Convex 12.7 mm of TTC-60:concave 6.35mm x convex 12.7 mm and concave 9.5mmx | |
TTC-500 and TTC-1000:concave 9.5mmx 25.4 mm of convex and concave 12.7mmx 25.4 mm of convex and concave 19.0mmx 25.4 mm of convex | |
O six corner convex adapter (1 for each) | |
19 mm x convex 12.7 mm of TTC-60: hexagon and 27 mm x convex 12.7 mm of hexagon | |
TTC-500, 27 mm x convex 25.4 mm of TTC-1000: hexagon and 38 mm x convex 25.4 mm of hexagon | |
O AC adapter 100-240V/50-60Hz | |
O six, bolt M10 with Sumianax 45 (including washer and nut ) | 4 |
○ instruction manual | 1 |
○ (with traceability chart ) with Calibration cert. | 1 |
■ Check & Repair
* Rough, it’s treated, long leaving and the use frequency, it’s a lot, there is time when accuracy is upset by a reason. calibration is needed periodically to keep accuracy .
At least, a year, once, calibration , I’ll recommend you (not free).
* Please consult with the store you buy or our business office about handling.
* By the incompleteness and the no load if failing to tear, by which a display is indication, a numerical value difference, I don’t recover, a case and Check & Repair are needed (not free).
※ The damaged situation can’t sometimes repair it.
Review TTC-500Torque checker
Chưa có đánh giá nào.