Electric Power Digitorqon [nut runner]
- Torque Torque range 1000-3000 N . m
- Calibration cert. Examination cert. with traceability chart
Electric wrench for torque control tightening of large bolt which had a torque measuring function nut of amount accuracy [nut runner].
I do LED indication of tightening torque , so the tightening result can be confirmed at the place where I worked.
The microSD memory card loaded on a torque display can preserve measured data.
It corresponds to measurement of tightening torque in both directions of left and right. With a judgement of acceptance function. Calibration cert. , standard accessory.
Is Manufacturer’s Suggested Retail Price in Japanese market as just for reference.
The specification
Models | Minimum torque capacity (N m) | The upper limit torque capacity (N m) | Idle speed (min-1[rpm]) | Measurement accuracy (the %) | Min. display | Operating humidity limit | Operating temp. range | Continuous usage limits | Single-phase voltage (V) | Max. current (A) | Max. power consumption (W) | Memory card | battery type | weight (g) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PDX301A | 1000 | 3000 | 3.5 | ± 4 Accessory reaction arm limitation. | 2-3 | 0-80%RH (It doesn’t condense into dew.) | 0-40 ℃ | About 20,000 times (about 170 hours) | 100 | 14 | 1,350 | microSD memory card (the correspondence capacity: At most 2 GB) | An AA battery -shapedx 4 Alkaline batteries or the charge system nickel hydoride battery | 14100 | |
PDX302A | 1000 | 3000 | 3.5 | ± 4 Accessory reaction arm limitation. | 2-3 | 0-80%RH (It doesn’t condense into dew.) | 0-40 ℃ | About 20,000 times (about 170 hours) | 200 | 7 | 1,350 | microSD memory card (the correspondence capacity: At most 2 GB) | An AA battery -shapedx 4 Alkaline batteries or the charge system nickel hydoride battery | 14100 |
- ※ A socket, reaction arm and a cord line aren’t included in Main body mass .
- ※ Corresponding to frequency 50-60Hz.
- ※ repeated accuracy +- 5% repeated accuracy is the one which expressed ill-balance of tightening torque in case of a tightening outrigger in the % by the same torque setting work condition.
- ※ “1” of a models end shows single-phase 200V to 100 V of single phase “2”.
- ※ Continuous usage limits , an AA battery-shaped, it’s the standard value in case of use by an alkaline batteries and automatic setting mode off.
Accessories
Straight-shaped, reaction arm (30SH) | 1 |
L-shaped Reaction arm (30SLH) | 1 |
Fixing screw with a hexagonal hole | 4 |
(−) Baby driver (for torque setting dial adjustments) | 1 |
(−) Driver | 1 |
Hexagonal stick L-shaped wrench (4mm) | 1 |
Battery (an AA battery-shaped, alkaline batteries) | 4 |
microSD memory card (full set) | 1 |
Instruction manual | 1 |
Calibration cert. (with traceability) | 1 |
Metal case | 1 |
- ※ microSD memory card (full set) :microSD memory card, SD card change adapter, clear hard cover, instruction manual and written guarantee.
※ Details of reaction arm see “reaction arm for new-style Electric Power Digitorqon and new-style power Digitorqon ” (new-style power Digitorqon and reaction arm for new-style Electric Power Digitorqon ), please.
※ A battery for bundling sometimes has the short life.
■Expiration date of calibration cert.
1. When unused.
The calibration weather for even 1 year of Calibration cert. and, it’s done.
2. When you have begun use by the calibration weather for less than 1 year of Calibration cert. .
Than put on the road, 1 year or tightening number of times even 5000 times and, it’s done.
■ Check & Repair
* torque equipment needs regular inspection. Once, please regularly inspect every once a year or 5000 time tightening (not free).
Precautions for use
- Torque Torque range fluctuates by the situation of bolt nut and the tightening target part.
Review PDX301AElectric Power Digitorqon
Chưa có đánh giá nào.