Nut runner(M22;M24)
Electric wrench for torque control tightening for M24 corresponding to a section.
I answer to tightening at the small part which can’t be used with a standard machine because it’s short with length 157mm.
It’s most suitable for an assembly part of the U rib part in a bridge and the truss part.
It’s possible to control the positive backspin identical torque value of amount accuracy .
High power M22 and M24 |
---|
Is Manufacturer’s Suggested Retail Price in Japanese market as just for reference.
The specification
Models | Max. torque (Nm) | Minimum torque capacity (N m) | The upper limit torque capacity (N m) | Idle speed (min-1[rpm]) | repeated accuracy (%) | Single-phase voltage (V) | Max. current (A) | Max. power consumption (W) | frequency (Hz) | The Suitable bolt size | Controller | weight (g) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
UR241T | 911 | 460 | 911 | 11 | ± 5. | 100 | 13.5 | 1,100 | 50-60 | High power A hexagon bolt :M22 and M24 | The outside bill torque controller | 6000 | |
UR242T | 911 | 460 | 911 | 11 | ± 5. | 200 | 6.5 | 1,100 | 50-60 | High power A hexagon bolt :M22 and M24 | The outside bill torque controller | 6000 |
- ※ A socket and a cable line aren’t included in Main body mass .
- ※ repeated accuracy is the one which expressed ill-balance of tightening torque which goes out to the time of a tightening outrigger by the same torque setting and work condition in the %.
Accessories
(24UR41T) for bar socket M24 | 1 |
The outside bill torque controller | 1 |
(−) Driver | 1 |
Connector (only 200V) | 1 |
Instruction manual | 1 |
Metal case | 1 |
※ bar socket for M22 (24UR36T) is an option.
Precautions for use
- Torque control range fluctuates by the situation of bolt nut and the tightening target part.
- It isn’t possible to load Digitorqon on this product.
Review Nut runner(M22;M24)
Chưa có đánh giá nào.