Cordless input Shear wrench(M16;M20;M22)
Cordless input Shear wrench for M22.
When a power supply securement is difficult for electric driver drill input, it’s convenient.
It’s usually pin tail fracture like Shear wrench , tightening completion.
The pursuit end and the confirmation of tightening torque are unnecessary.
|High power M16, M20 and M22|
Is Manufacturer’s Suggested Retail Price in Japanese market as just for reference.
|Models||Max. torque (Nm)||Idle speed (min-1[rpm])||The Suitable bolt size||weight (g)||Input tool|
|MDD220T||735||2.2||Torshear type high power bolt :M16, M20 and M22||4000||Electric driver drill|
- ※ A socket, a socket adapter for charge system electric drills and an electric driver drill aren’t included in Main body mass .
- ※ Idle speed is the price when Idle speed of an electric driver drill is 1050min-1.
|Inner socket (216TA) for M16||1|
|Inner socket (220TA) for M20||1|
|Inner socket (222TA) for M22||1|
|Outer socket (M216) for M16||1|
|Outer socket (M220) for M20||1|
|Outer socket (M222) for M22||1|
|Socket adapter for charge system electric drills (2BSA-12)||1|
- ※ An electric driver drill doesn’t attach.
■ Wrench use method
※ This product is final tightening exclusive use. After going on Snug Tightening by a set way using Tatekata ichiban and Torque Wrench beforehand, please use.
Shear wrench is set in bolt /nut .
A socket adapter of an accessory is installed in the electric driver drill, it’s set in Shear wrench and it’s started.
When tightening is developed and I reach prescriptive torque , pin tail part of bolt fractures, tightening completion.
EJEKUTOREBA is pulled and a pin tail is excreted.
■ Electric driver drill necessary capacity data
|Electric driver drill Necessary capacity||Biggest torque (high-speed drill mode)||More than 8.8 N . m|
|Idle speed (fast mode)||1050 min – more than 1|
|Recommendation Battery||The Battery voltage||More than 14.4 V|
|The Battery capacity||More than 1.5Ah.|
|The Battery kind||Without designation|
※ When you use the electric driver drill with which necessary capacity isn’t filled, a breakdown and tightening badness are caused.
※ The tightening number rule of thumb per 1Battery
(In case of Battery voltage 14.4V and Battery capacity 1.5Ah)
About 20 of torshear type high power bolt M16:
About 15 of M20:
About 10 of M22: